Here Windstar's galley with the revised single-piece hingeless fridge lid/countertop. More detail is included in the fridge refit post.
The original counter is made of plywood and is xx thick.
A nicely made range I saw at the southampton boat show in the UK a few years back.
- Fridge lid 23.125"w X 33d incl rabbet
- Sink portion 24.5d X 18.5w
- Engine box cover 39.5d x 19w
- Soap storage and dispensing has a dedicated home. Done, see this post.
The sink is 10" deep to the top of the flanges.
The through hull is several inches aft of the drain, which s centered in the sink. A drain at the back would make better use of the cabinet space.
Foot-pump could benefit from incorporation of a water filter.
No comments:
Post a Comment
Comments and corrections welcome!